Signed in as:
filler@godaddy.com
Signed in as:
filler@godaddy.com
SpaceMax is our easiest, lowest-cost cubicle system — panels snap together with no tools. A straight wall is just PANELS (pick 42" for a low, open look or 66" for full privacy) since the in-line connectors are built in. Add connector POLES only at corners and intersections, then finish with bases, end caps, and wall mounts. Every price below is 40% off N9NE list (list price shown in parentheses).
SpaceMax panels snap together in a straight line on their own — connectors are built in, so a straight run needs NO pole and NO tools. Add a pole only where the wall turns or branches: 2-Way (SP2-66) for an L-corner $67 (list $112); 3-Way T (SP3-66) for a branch $85 (list $142); 4-Way (SP4-66) for a four-panel cross $85 (list $142). Count only your corners and intersections. Also in 42" tall: SP2-42 $46 (list $77), SP3-42/SP4-42 $55 (list $92).
The most popular wall size — a full-height 66" panel for privacy, 36" wide, $296 (list $493). Other 66" widths: 24"W $248 (list $414), 30"W $272 (list $453), 42"W $323 (list $539), 48"W $340 (list $567), 60"W $393 (list $655), 72"W $480 (list $800). Low 42"H panels start at $220 (list $366).
Same as a standard panel but with a glass top section to let light through and keep an open feel. 36"W $346 (list $576). Also in 24"W $292 (list $486) and 30"W $314 (list $524).
The small parts that finish a cubicle: T-Base SPBASE $37 (list $61, stabilizes poles); End Covers SPCAP 24"/42"/66" $11/$17/$25 (list $19/$29/$41, cap exposed panel ends); Wall Mounts SPWM 42"/66" $44/$65 (list $73/$108, attach a panel to a wall). Add a base for each pole and an end cover wherever a panel ends.
Our upgraded, heavier-duty system with built-in power options. Choose POWERED panels for in-wall outlets or NON-POWERED to save money. Heights: 39" (low), 53" (mid), 67" (tall). Add power poles, base feeds, glass toppers, and tool bars as needed. Every price below is 40% off N9NE list (list price shown in parentheses).
A tall, full-privacy 67" wall panel. Every Webb panel comes two ways: NON-POWERED (lower cost) or POWERED (built-in wiring for outlets). Non-powered start prices: 39"H from $155 (list $259), 53"H from $197 (list $328), 67"H from $239 (list $398). Powered start prices: 39"H from $194 (list $324), 53"H from $236 (list $393), 67"H from $278 (list $463). (This P6736 is the 67x36 non-powered: $349, list $581.) Ask us for the exact price on your size.
To get power into your cubicle: Power Pole KTPELPWRPL $133 (list $221, brings electricity down from above) and Base Feed PELBSFD-L $178 (list $296, feeds power in at floor level, 4-circuit/8-wire). You need at least one feed per powered run.
Finish and upgrade your Webb cubicle: Glass topper panels (clear, mount on top) pairs from $119 (list $199); Paper-flow tool bars $39–$45 (list $65–$75); End caps with bottom cover $26–$39 (list $43–$65); Wall start kits $45–$68 (list $75–$113, to begin a run against a wall).
Border screens add privacy and a finished look on top of desks or between workstations. Clear acrylic or frosted Visconti panels in silver or black frames, plus connecting posts. Pick a screen width to match your desk, then add posts to stand them up. Every price below is 40% off N9NE list (list price shown in parentheses).
Clear acrylic or frosted Visconti screens, silver or black frame. Match the width to your desk (sale / list each): 24"W $68 ($113), 30"W $81 ($135), 36"W $95 ($158), 42"W $110 ($184), 48"W $127 ($212), 60"W $147 ($245), 66"W $169 ($281), 71"W $184 ($306).
The post that holds screen panels upright and links them together, $42 (list $70). Use one between each pair of screens, plus one on each open end. Available in silver or black to match your frames.
SALE: every price below is 40% OFF N9NE list price — the list price is shown so you can see your savings. Prices are each and may change; we confirm your final quote before you pay. Most parts ship fast from local stock. Need help? We'll spec your whole layout free.
Choose SpaceMax (budget), Webb (premium/powered), or Borders (privacy screens) from the list above. Not sure? Send us your room size and we'll recommend one.
Write down the part number and quantity for each piece you want (for example: "SP6636 Panel x6, SP2-66 Pole x4, SPBASE x4"). Use the lists above as your menu.
Send us your parts list using the “Get a Free Quote” form on our Contact page, or stop by our showroom at 6707 NE 117th Ave, Suite 102B, Vancouver, WA. Just paste your part numbers and quantities in the message box and add your name, phone, delivery ZIP, and whether you want delivery, install, or will-call pickup. We’ll reply with a final quote and lead time.
Approve the quote and we'll send a secure invoice. Once paid, we place the order and schedule your delivery, install, or pickup. That's it — we handle the rest.
Send us your room dimensions (or a rough sketch) and how many people you need to seat. We'll put together a complete parts list and quote for you — no charge, no obligation. Local delivery and professional installation available throughout Portland OR and Vancouver WA.